Electrical Characteristics
Ambient Temp. Range: -35C to +55C
Rated Speed: 7.5 RPM Non Continuous
Rated Voltage: 240V RMS, 120 VDC
Rated Current: 6@60 Amps, 10@20 Amps, 84@5 Amps
Surge Current: 15 Amps
Curcuit Resistance: Circuit Insulation: <5mA@600 V RMS
Construction Characteristics
Frame: Totally Enclosed
Hardware: Cad plated or Stainless Steel
Housing: Aluminum Alloy, Anodize per Mil-A-8625
Bearings: Single Shielded, Lubricated per Mil-G-23827
Rotor: Aluminum Alloy, Anodize per Mil-A-8625
Rings: Silver 90%, Copper 10%
Insulation: Fungus Inert per Mil-Std-454
Brush Block: Replaceable Type
Brushes: Silver 80%, Graphite 20%
Rotor Connection: Custom Built (Conduits to connectors or wires plain per Schematic Insulation per Mil-W-16878, Type E)
Stator Connections: Custom Built (Conduits to connectors or 4-40 UNC studs)
Mechanical Characteristics
Shaft End Play: <0.015″ with 8 Lb thrust load
Drag Torque: < 30 oz-in with 8 Lb thrust load
Number of Circuits: Figure has 100 circuits
Number of Brushes/Circuits: 2 Minimum
Total Weight: < 20 Lbs (for unit shown)
Life: 90,000 Hours @ 5 rpm
DIMENSIONTIONS ARES IN INCHES
